Blasting Machinery

We are blasting machines importers and our market is mainly focused on Italy and Central Europe.We are currently looking for new models to insert in our catalog,so this deal should be finalised as a long time contract.
Specifically now we are now looking for two units:
a) *Middle-size manual sandblaster cabins*
 TECHNICAL SPECIFICATIONS  - Manual Gun with pedal  - Grilled work surface around 850 x 800mm  - Pressure regulator and pressure gauge  - Abrasive resistent rubber gloves  - Glass inspection  - Internal ligth  - Suction chamber on board with Filter Cartridge  - Utilizable abrasives : Alluminum Oxide withe / brown, Glass  Beads,Ceramic Glass, Angular metal sands, Plastic Media Type V. etc.

b) *Large blasting rooms (chambers)*The modular blast room should be specially ventilated and illuminated for enclosed abrasive blasting, and   a fully sealed, dust tight, all steel structure. The components should be prefabricated for simple bolt-together erection, with little or no job site 
welding required. The enclosure stands by it’s own structural support without connections to the surrounding facilities. 
Internally, the enclosure should have no areas, other than the floor, where airborne media or dust may be 
captured. The manual compressed air blasting rooms are specially engineered forblasting a wide range of pieces with large dimensions and varioustypologies, realised with modular panels and profiles.The blasting operation can start by moving the control lever placed onthe hose.The mixing abrasive-slag-waste, fallen on the floor is manually orautomatically recovered and conveyed to the base of the elevator to betransported up to the separator.The abrasive is then separated from oversize contaminants, worn-outabrasive and dust.The clean abrasive is finally returned to the storage silo to be reused.